On this page
Dell Precision 5490 Stylus Button Not Working Fix
Dell Precision 5490 · Core Ultra 7 165H · Windows 11 · Active pen
The Dell Precision 5490 supports Dell Active Pen (PN series) with programmable buttons. When stylus buttons do not work, they may not trigger their assigned actions (eraser, right-click, app launch) despite the pen tip drawing correctly. Button function depends on both Bluetooth pairing and the Dell PenHub software configuration.

Fix 1 — Confirm Bluetooth is paired
The stylus button functions require Bluetooth pairing. Go to Settings → Bluetooth & devices and confirm the Dell Active Pen is listed and connected. If not paired, hold the pen top button for 5 seconds to enter pairing mode, then add the device from Bluetooth settings. Without Bluetooth pairing, the pen tip (EMR digitizer) works but all barrel buttons, eraser, and top button send no signal to Windows on the Dell Precision 5490.
Fix 2 — Configure buttons in Dell PenHub
Open Dell PenHub from the Start menu (or Dell Mobile Connect if installed). Navigate to Pen Configuration → Button Settings. If the buttons are assigned to “No Action”, they appear to not work even when Bluetooth is paired. Assign each button to a function: right-click, eraser, screenshot, or launch app. Without explicit button assignments in Dell PenHub, the pen buttons have no function on the Dell Precision 5490 even when the hardware is fully paired.

Fix 3 — Update the Windows Ink and pen driver
Go to Dell Support, find Precision 5490, and download the Dell Pen Digitizer Driver and Intel Integrated Sensor Driver. Install both and restart. A Windows Update may have replaced the Dell-specific pen driver with a generic Windows Ink driver that does not support the barrel button mapping configured in Dell PenHub. The Dell pen driver update restores full button functionality on the Precision 5490 Core Ultra 7 165H.
Fix 4 — Remap buttons in the drawing application
In drawing applications like Adobe Photoshop, Clip Studio Paint, or Krita, go to Preferences → Pen/Tablet settings and map the barrel button to the desired function. Some drawing apps require their own button configuration separate from Dell PenHub and Windows Ink. If the button works as a right-click in Explorer but not in the app, the app is overriding the button mapping and needs its own in-app configuration on the Precision 5490.

Fix 5 — Replace the pen battery
Dell Active Pen (PN series) uses a AAAA battery. A low battery can cause button signal transmission to fail intermittently while the pen tip still draws. Replace with a fresh AAAA battery. After battery replacement, re-pair the pen via Bluetooth (go to Bluetooth settings, remove the old pen device, then pair again). Battery-related button failures are intermittent, becoming more frequent as the battery depletes on the Dell Precision 5490 pen.
Roslinda, Bangsar: “Dell Active Pen barrel button was not working on my Precision 5490. Found Dell PenHub had all buttons set to No Action after a Windows Update. Reassigning them in PenHub immediately restored right-click and eraser button functionality.”
Frequently Asked Questions
Which Dell Active Pen models are compatible with the Dell Precision 5490?
The Dell Precision 5490 is compatible with the Dell Active Pen PN7522W (the included pen with some configurations) and other Dell PN series active pens (PN350M, PN5122W). Third-party MPP 2.0 pens (Microsoft Surface Slim Pen 2, HP MPP 2.0) also work for tip drawing and Bluetooth button functions. Confirm MPP 2.0 compatibility of third-party pens before relying on button functions.
Does the Dell Precision 5490 pen digitizer support tilt detection?
Yes. The Dell Precision 5490 touch display digitizer supports tilt detection for compatible pens (Dell PN7522W and MPP 2.0 pens with tilt capability). Tilt data requires Bluetooth pairing for transmission to the host. Drawing apps that support tilt-based brushes (Photoshop, Clip Studio Paint) use tilt to adjust brush angle and width for natural drawing technique on the Precision 5490.
Can I assign the Dell Active Pen button to launch a specific application on the Precision 5490?
Yes. In Dell PenHub, assign the top button or barrel button to “Launch App” and select any installed application from the list. Common choices include Adobe Photoshop, OneNote, Clip Studio Paint, or Windows Snipping Tool. The app launches when the button is pressed regardless of which app is currently in focus on the Dell Precision 5490.
Does Dell PenHub need to be running for buttons to work on the Precision 5490?
Yes. Dell PenHub runs as a background service to intercept pen button signals and translate them to the configured actions. If PenHub is closed or its service is stopped, pen buttons may revert to default Windows Ink actions (typically right-click for barrel button) or produce no action at all. Ensure PenHub is set to start with Windows for consistent button behavior on the Dell Precision 5490.
Ryan holds a Computer Science degree and has over 20 years of hands-on experience with PC hardware, software, and driver troubleshooting. He is the author behind softwaredriverdownload.com, where he helps everyday users fix driver issues quickly and accurately. Ryan has personally tested most of the fixes on this site across a range of Windows 10 and Windows 11 machines.
Leave a Reply