HP Pavilion Aero 13 AMD Ryzen 5 7535U Touchpad Not Clicking Fix Windows 11

Windows 11

The cursor glides fine on the HP Pavilion Aero 13 but pressing the touchpad does nothing. The lightweight AMD Ryzen 5 7535U model uses a Windows precision touchpad, where a reset click setting or a corrupted driver after an update is the most common cause of dead clicks.

HP Pavilion Aero 13 touchpad not clicking fix Windows 11

Fix 1 — Check the Touchpad Click Settings

Settings → Bluetooth and devices → Touchpad. Make sure Tap to click is enabled, raise the touchpad sensitivity, and confirm the press options under Taps are all ticked. A Windows 11 update can switch these off and make clicks appear broken on the Pavilion Aero 13.

Fix 2 — Reinstall the Precision Touchpad Driver

  • Device Manager → Human Interface Devices
  • Find the I2C HID or precision touchpad device → Uninstall device
  • Restart so Windows reinstalls it automatically
  • Then install the HP touchpad driver from HP Support for Pavilion Aero 13
HP Pavilion Aero 13 precision touchpad driver reinstall Windows 11

Fix 3 — Run the Hardware Troubleshooter

Open Command Prompt and run msdt.exe -id DeviceDiagnostic to launch the Hardware and Devices troubleshooter. It can re-enable a disabled touchpad and reset its configuration on the Pavilion Aero 13 without a manual driver reinstall.

Fix 4 — Update BIOS via HP Support Assistant

HP Support Assistant → Updates. Install any BIOS and firmware updates for the Pavilion Aero 13. HP includes touchpad controller firmware in some BIOS updates that resolves intermittent or dead click behaviour.

“Reinstalling the precision touchpad driver from HP Support brought the physical click back on my Pavilion Aero 13.” — Suria, Kajang

HP Pavilion Aero 13 touchpad click settings Windows 11 fix
About the Author
Ryan holds a Computer Science degree and has spent over 15 years troubleshooting Windows hardware and driver issues across major laptop brands. He writes practical, step-by-step guides for everyday users at softwaredriverdownload.com.

Frequently Asked Questions

Why is the touchpad not clicking on HP Pavilion Aero 13?

On the HP Pavilion Aero 13, the cursor may move but physical clicks do nothing if Tap to click is on while the click mechanism is disabled, if the precision touchpad driver is corrupted, or if a recent Windows 11 update reset the touchpad click settings.

How do I fix touchpad clicking on Pavilion Aero 13?

Settings → Bluetooth and devices → Touchpad. Confirm Tap to click and the press-to-click options are enabled, and raise the touchpad sensitivity. If clicks still fail, reinstall the touchpad driver from HP Support for Pavilion Aero 13.

Does the touchpad still tap but not press on Aero 13?

If tapping works but a physical press does not register, the issue is usually the click settings or driver, not the hardware. Enable Tap to click as a workaround while you reinstall the precision touchpad driver to restore the physical click.

Could a swollen battery stop clicks on Pavilion Aero 13?

Rarely, but it is worth knowing. On older units a swollen battery beneath the touchpad can press up and prevent the click mechanism from moving. If the trackpad feels raised or stiff, stop using the laptop and have the battery checked by a technician.


Posted

in

by

Tags:

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *