Category: Blog
-
HP Envy 13 BIOS Recovery: Windows Logo Key + V Key Combination Guide
The HP Envy 13’s BIOS recovery key combination — Windows logo key and V held during startup — triggers HP Sure Start, the hardware-level BIOS recovery feature built into the laptop’s firmware chip. This method works even when Windows refuses to boot and the BIOS setup screen is inaccessible. This guide explains when to use…
-
Dell Inspiron 5000 RAM Maximum Upgrade: 32GB DDR4 Compatibility Test
The Dell Inspiron 5000 series supports RAM upgrades on most variants, but the maximum capacity and whether all slots are user-accessible varies by generation. Some models ship with 8 GB or 16 GB and have room to reach 32 GB with the right modules. This guide identifies your exact slot configuration and confirms DDR4 compatibility…
-
Driver Update Error 0x80070103? Your Installed Version Is Already Newer
Error 0x80070103 means Windows Update is trying to install a driver that is already on your system at the same or newer version – the fix is to hide that specific update using Microsoft’s wushowhide tool, not to reinstall or roll back your driver. This error is not a sign that something is broken. It…
-
Windows 11 Not Detecting USB Printer? Connect Cable When Asked
Run the printer’s OEM installer first while the USB cable is unplugged, and only connect the cable when the installer asks you to – connecting too early causes Windows 11 to install the wrong generic driver and the printer will not be detected correctly. Windows 11 auto-detects USB devices the moment they are connected and…
-
Yellow Exclamation in Device Manager? Read the Error Code First
Right-click the flagged device, select Properties, and read the specific error code in the Device status box before touching any driver – Code 10, Code 28, Code 43, and Code 45 each have a different root cause and a different fix, and the standard update the driver advice only resolves one of them. The yellow…
-
External Monitor Not Detected After Sleep on Windows 10? Fix This
When Windows 10 fails to detect an external monitor after waking from sleep, press Win + Ctrl + Shift + B to reset the graphics driver – if the monitor comes back, you need a newer GPU driver; if it stays blank, the problem is a power management setting in Device Manager that is cutting…
-
Windows 11 Update Broke Your Drivers? Roll Back and Block It
Open Device Manager, right-click the broken device, go to Properties, Driver tab, and click Roll Back Driver – then immediately use wushowhide to block that specific driver update, or Windows will push it back automatically on the next update cycle and undo the fix. If Windows Update pushed a bad driver and something stopped working…
-
Monitor Showing Wrong Colors After Windows 10 Driver Update? Fix It
Wrong colours after a Windows 10 driver update are caused by the update deleting or resetting your monitor’s ICC colour profile – go to Colour Management in Control Panel, select your monitor, and re-add the correct ICC profile from your monitor manufacturer to restore accurate colours. After a GPU driver update, colours may look washed…
-
Windows 11 Cannot Find Printer Driver? Download It From the Manufacturer
When Windows 11 cannot find a driver for your printer, go to the manufacturer’s support site, search for your printer model, and download the full driver package for Windows 11 – do not rely on Windows Update, especially for models that use older V3 drivers. Windows 11 displays the driver not found error when it…
-
Unknown Device in Device Manager? Use the Hardware ID
Right-click the Unknown Device in Device Manager, select Properties, go to the Details tab, change the dropdown to Hardware IDs, and copy the first entry – that string containing VEN and DEV codes uniquely identifies the hardware manufacturer and product, pointing you directly to the correct driver without any guesswork. An Unknown Device entry in…