Dell Latitude 7440 Intel Core Ultra 7 165U TrackPoint Not Working Fix Windows 11

Q: Why is the TrackPoint not working on Dell Latitude 7440?

The Latitude 7440 TrackPoint relies on the Dell Pointing Device driver and an enabled touchpad setting. A Windows 11 update can replace the Dell driver with a generic one that does not expose the TrackPoint.

Q: How do I enable the TrackPoint on Dell Latitude 7440?

Settings, Bluetooth and devices, Touchpad, confirm the pointing stick toggle is on. If absent, reinstall the Dell Pointing Device driver from Dell Support for Latitude 7440.

Q: Can the BIOS disable the TrackPoint on Latitude 7440?

Yes. The BIOS Pointing Device setting under System Configuration can disable the TrackPoint if set to Touchpad Only. Set it to the enabled option and save.

Q: Does TrackPoint drift mean it is broken on Latitude 7440?

Not usually. Slow drift while untouched is normal recalibration. Lift your finger off the stick to let it self-centre. Persistent fast drift can mean a stuck cap, so reseat the red TrackPoint cap.

Dell · Latitude 7440 · Windows 11

TrackPoint Not Working Fix

The red TrackPoint stick on the Dell Latitude 7440 stops moving the cursor while the touchpad still works, or both stop after a Windows update. The Intel Core Ultra 7 165U model uses the Dell Pointing Device driver to drive the TrackPoint, and a missing or generic driver is the most common reason the stick goes dead.

If both the TrackPoint and touchpad are dead, suspect the driver or BIOS. If only the TrackPoint is dead, suspect the touchpad setting or the BIOS Pointing Device option.

Dell Latitude 7440 Dell Pointing Device driver reinstall Windows 11

Fix 1 — Reinstall the Dell Pointing Device Driver

Open Dell Support for Latitude 7440 and enter your Service Tag
Under Mouse, Keyboard and Input Devices, download the Dell Pointing Device driver
Device Manager → Mice and other pointing devices → uninstall the existing entry
Run the Dell installer and restart

Fix 2 — Enable the Pointing Stick Toggle

Settings → Bluetooth and devices → Touchpad. Expand the additional settings and ensure the TrackPoint or pointing stick option is enabled. If the touchpad was recently disabled, the TrackPoint can be tied to the same control and switched off with it.

Fix 3 — Check the BIOS Pointing Device Setting

Restart and press F2 to enter BIOS. Go to System Configuration → Pointing Device. Make sure the TrackPoint/pointing stick is enabled rather than set to Touchpad Only. Save with F10 and reboot, then retest the red stick.

“Reinstalling the Dell Pointing Device driver brought my Latitude 7440 TrackPoint straight back after a Windows 11 update killed it.” — Syafiq, Shah Alam

Dell Latitude 7440 BIOS pointing device setting TrackPoint fix Windows 11

About the Author
Ryan holds a Computer Science degree and has spent over 15 years troubleshooting Windows hardware and driver issues across major laptop brands. He writes practical, step-by-step guides for everyday users at softwaredriverdownload.com.

Frequently Asked Questions

Why is the TrackPoint not working on Dell Latitude 7440?

The Dell Latitude 7440 TrackPoint (the red pointing stick) relies on the Dell Pointing Device driver and an enabled setting in the touchpad control panel. A Windows 11 update can replace the Dell driver with a generic one that does not expose the TrackPoint, leaving the red stick unresponsive.

How do I enable the TrackPoint on Dell Latitude 7440?

Open Settings → Bluetooth and devices → Touchpad → expand the related settings and confirm the TrackPoint or pointing stick toggle is on. If no such option appears, reinstall the Dell Pointing Device driver from Dell Support for Latitude 7440.

Can the BIOS disable the TrackPoint on Latitude 7440?

Yes. The Latitude 7440 BIOS has a Pointing Device setting under System Configuration. If it is set to Touchpad Only, the TrackPoint is disabled at the firmware level. Set it to Touchpad and PS/2 Mouse or the equivalent enabled option and save.

Does TrackPoint drift mean it is broken on Latitude 7440?

Not usually. Slow cursor drift while the TrackPoint is untouched is normal recalibration behaviour. Lift your finger off the stick for a few seconds and it self-centres. Persistent fast drift can indicate a stuck cap, so reseat the red TrackPoint cap.

Posted

September 17, 2026

Blog

admin

Tags: