The HP ProBook 440 G11 charges up to about 80 percent and then stops, showing Plugged in, not charging. The Intel Core Ultra 5 125U business model ships with HP Battery Health Manager enabled, which deliberately caps the charge to protect the battery. The fixes below let you raise the ceiling or confirm whether the battery itself is healthy.

Change Battery Health Manager in BIOS
Restart → F10 to enter BIOS → Advanced → Battery Health Manager. Switch from Maximize my battery health to Maximize my battery duration or Let HP manage. Save with F10. This removes the 80 percent charge ceiling on the ProBook 440 G11.
Run HP Support Assistant Battery Check
Open HP Support Assistant → Troubleshooting and fixes → Battery check. A result of Weak or Replace means the cell is degraded, which can mimic an 80 percent cap. A Good result confirms the limit is a setting, not hardware.
Update the HP Battery and Chipset Drivers
HP Support Assistant → Updates. Install the latest HP firmware, chipset and HP CMSL battery utility updates for the ProBook 440 G11. A stale power driver can report charge state incorrectly and stop charging early.
Calibrate the Battery
Once the cap is off, discharge to about 10 percent, then charge uninterrupted to 100 percent and leave it for two hours. This recalibrates the gauge on the ProBook 440 G11 so the reported percentage matches the real charge level.
“It was Battery Health Manager all along. Switching it in the ProBook 440 G11 BIOS let it charge to 100 percent again.” — Rosli, Seremban


Ryan holds a Computer Science degree and has spent over 15 years troubleshooting Windows hardware and driver issues across major laptop brands. He writes practical, step-by-step guides for everyday users at softwaredriverdownload.com.
Leave a Reply