HP ProBook 440 G11 Wi-Fi Not Connecting Fix
Intel AX211
Wi-Fi 6E
Your HP ProBook 440 G11 does not connect to Wi-Fi, shows “No internet” after connecting, or drops the Wi-Fi connection repeatedly during work. Intel Wi-Fi driver updates and network stack reset restore reliable Wi-Fi on the ProBook 440 G11.
“ProBook 440 G11 Core Ultra 5 125U kept dropping office Wi-Fi every 20 minutes. Disabled Intel Wi-Fi power saving in Device Manager and updated driver via HP Support Assistant. Connection has been stable for weeks since. Power saving was turning off the Wi-Fi adapter during idle periods between Teams calls.” – Hasnul, network administrator from Cyberjaya
Update Intel Wi-Fi driver via HP Support Assistant
Open HP Support Assistant and install Intel Wi-Fi 6E AX211 Driver updates. Restart. The Intel AX211 driver manages Wi-Fi 6E band selection, roaming aggressiveness, and power state transitions. An outdated driver after Windows Update can cause the adapter to fail the WPA3 or WPA2 authentication handshake with the access point, producing connection failures or immediate disconnection after the password is accepted on the HP ProBook 440 G11.
Disable Wi-Fi adapter power saving
Open Device Manager – Network adapters – Intel Wi-Fi 6E AX211 – Properties – Power Management. Uncheck Allow the computer to turn off this device to save power. Also go to the Advanced tab – find 802.11 Power Save Mode or Power Saving Mode – set to Disabled. Wi-Fi power saving turns off the radio during idle periods between data transmissions, causing disconnection in office environments with aggressive DHCP lease timers or AP idle timeouts.
Reset TCP/IP and Winsock
Open Command Prompt as administrator. Run: netsh int ip reset then netsh winsock reset then ipconfig /flushdns. Restart. TCP/IP and Winsock reset clears corrupted network stack configuration that produces “no internet” symptoms even when the Wi-Fi connection shows as connected. This resolves the case where the ProBook 440 G11 connects to the access point but cannot reach the internet due to DNS or routing table corruption in the Windows network stack.
Forget and reconnect to Wi-Fi network
Go to Settings – Network and internet – Wi-Fi – Manage known networks. Find the problematic network and click Forget. Then reconnect and enter the Wi-Fi password. Forgetting the network clears cached connection profile data including IP lease, DNS settings, and security certificates that can become stale or corrupted after router firmware updates or IT network changes, causing authentication failures on the HP ProBook 440 G11 Intel Wi-Fi 6E adapter.
Frequently Asked Questions
How do I fix Wi-Fi not connecting on HP ProBook 440 G11 Intel Core Ultra 5 125U?
Update Intel AX211 driver via HP Support Assistant. Disable Wi-Fi power saving in Device Manager. Run netsh int ip reset and winsock reset in admin Command Prompt. Forget and reconnect Wi-Fi network.
Why does HP ProBook 440 G11 Intel Core Ultra 5 125U keep dropping Wi-Fi?
Intel Wi-Fi power saving turning off adapter during idle (most common). Disable in Device Manager – Power Management and Advanced – 802.11 Power Save Mode. Critical fix for office environments with frequent Teams/Zoom calls.
What Wi-Fi adapter does HP ProBook 440 G11 Intel Core Ultra 5 125U have?
Intel Wi-Fi 6E AX211 supporting 802.11ax on 2.4GHz, 5GHz, and 6GHz bands. Wi-Fi 6E 6GHz provides fastest speed and lowest congestion in office environments with many Wi-Fi 6E capable devices and access points.
Why does HP ProBook 440 G11 show limited connectivity on Wi-Fi?
TCP/IP stack or DNS corruption. Run netsh int ip reset and winsock reset in admin Command Prompt. Also try Forget network and reconnect. If persistent, check with IT that DHCP server is assigning addresses correctly.
Conclusion
HP ProBook 440 G11 Intel Core Ultra 5 125U Wi-Fi not connecting in Windows 11 is resolved by updating the Intel Wi-Fi 6E AX211 driver via HP Support Assistant to restore authentication handshake reliability. Power saving disable in Device Manager Power Management and Advanced settings prevents the adapter from dropping the radio during idle periods between active data transfers. TCP/IP and Winsock reset via netsh commands clears network stack corruption producing no-internet symptoms despite connected status. Forget and reconnect removes stale cached profile data causing authentication failures after network infrastructure changes on the HP ProBook 440 G11 enterprise Wi-Fi platform.
Ryan holds a Computer Science degree and has spent over 15 years troubleshooting Windows hardware and driver issues across major laptop brands. He writes practical, step-by-step guides for everyday users at softwaredriverdownload.com.
Leave a Reply